5
TECHNICAL SAFETY
p
Check the drying cabinet for visible signs of damage before install-
ing it. A damaged drying cabinet must not be used as it may pose a
hazard.
p
The drying cabinet must be installed and kept indoors.
p
The drying cabinet may only be connected to an earthed power
socket installed in accordance with applicable safety instructions. The
wall socket must be accessible after installation so that the power
supply to the drying cabinet can be disconnected at any time.
p
Make sure that the data on the drying cabinet identification plate
(fuse, voltage and frequency) agrees with that of the mains power
supply at the site of installation.
p
Do not connect the drying cabinet to the power supply with an
extension lead as the necessary safety cannot be guaranteed (risk
of overheating).
p
If the power cord is damaged, it must be immediately replaced, and
this must be done only by the manufacturer, the manufacturer's
service agent or similarly qualified persons in order to avoid danger.
IMPORTANT SAFETY INFORMATION
Summary of Contents for ETS 1500
Page 20: ...Gematech Innovation ...