Nimbus Water Systems WIMI6200, User Manual, Page: 72 / 72

WiMi6200 User’s Manual
4.3 How to connect Smart Phone/Tablet PC to WiMi6200TW over Wi-Fi
 Connect smart phone or tablet PC directly to WiMi6200TW over Wi-Fi for running
BSplayer (Android devices) or Aceplayer (IOS5 devices)

Usually, the smart phone or tablet PC can decode SD video (480p60/576/p50) well.
But, the full HD (1080p60/50) or 720p60/60 would not be decoded well in some
smart phones or tablet PCs. In this case if the resolution of the encoding video is
changed to lower resolutions or reduce the frame rate from 60/50 to 30/25, then it
will be decoded well.
 Be sure, the smart phone or tablet PC must support 5GHz Wi-Fi (IEEE 802.11a/n).
 Typical SSID of the WiMi6200TW is WiMi6200_xx. Refer Table-2 Selection of Wi-Fi
Ch. and SSID on the front panel of the WiMi6200T on section 1.5.1.

Connect to WiMi6200TW with that SSID.
 Type a password (Encryption Key) as follow

Encryption Key: xyj < SSID >.
Ex) If the SSID is WiMi6200_02 , then the key value is xyj WiMi6200_02 , case
sensitive.

When the mobile device is connected to the WiMi6200TW, you can run the
application, AcePlayer for Apple’s IOS device and BSplayer for Android device.
Enter the following into the URL field.
 rtsp://192.168.2.1:8554/stream
 Connect Smart Phone or Tablet PC to the WiMi6200T over Wi-Fi via wireless AP for
running BSplayer (Android devices) or Aceplayer (IOS5 devices)

Connect the WiMi6200T to a wireless access point (AP) through an Ethernet cable.
 Connect the mobile device to the wireless AP over 802.11n Wi-Fi (5GHz mode, if
possible).

Check the network connection to the IP address of the WiMi6200T using “ping”
at the PC.
 When the mobile device is connected to the WiMi6200T, you can run BSplayer
(Android devices) or Aceplayer (IOS5 devices). Enter the following into the URL
field.

rtsp:// IP address of WiMi6200T :8554/stream
Distributed by Pera Systems, Inc. Page 71 v1.2