WiMi6200 User’s Manual
•
Connection via LAN will allow video from the WiMi6200T to be streamed to
the WiMi6200R without any changes being made to the settings. Customers
with both units should test this configuration first. And then, you can
change the video port on the WiMi6200T and WiMi6200R via Select button
or a web browser explained below Quick Start 2.
•
Customers with WiMi6200T encoder only should test with PC with some
change setting explained below Quick Start 2 and Quick Start 3.
Quick Start 2 - Connecting a web browser to adjust/ change settings.
The WiMi6200T/R has a web interface for configuration of all audio/video parameters,
network functions etc. Currently you have to use Internet Explorer or Chrome web browser for
this function.
Having connected the WiMi6200T to a video/audio source and 12V DC, next connect the
Ethernet port of WiMi6200T to an Ethernet L2 switch (L2 Hub), or to a PC directly using an
Cat.5e UTP cable (not supplied).
Connect a laptop or PC to the same network that the WiMi6200T is connected to. And,
change the IP address of PC to 192.168.0.xxx. Open a web browser and type the 192.168.0.161
on the URL field of the web browser. Then you can see the WiMi6200T web page. All the same
procedure will be applied to the WiMi6200R, except the IP address, 192.168.0.162.
Quick Start 3 - Video/audio streaming server for RTSP client (VLC player)
The WiMi6200T can be set to operate as a streaming server that sends video/audio to a
software decoder, such as the VLC player on the PC, Ace Player for IOS devices and BS Player
for Android devices.
To test software decoding using VLC player please follow these instructions:
1)
Browse to the WiMi6200T IP address using web browser, such as the Internet Explorer
or Chrome.
2)
On the Streaming Control page of the WiMi6200T, section 3.4.1.4, select
RTP
on the
Encapsulation
pull down menu and select
ON
of the
RTSP Server
pull down menu.
Then press SUBMIT to activate these setting changes to RAM
3)
If you wish to save this configuration to FLASH memory so that after next power up
these settings will be default, go to SAVE SETTINGS and click SAVE then confirm.
4)
Execute the VLC player. Select
Media(M)
pull-down menu and select
Open Network
Distributed by Pera Systems, Inc.
Page 23
v1.2
Summary of Contents for WIMI6200
Page 5: ...WiMi6200 User s Manual Distributed by Pera Systems Inc Page 4 v1 2 ...
Page 6: ...WiMi6200 User s Manual Distributed by Pera Systems Inc Page 5 v1 2 ...
Page 48: ...WiMi6200 User s Manual Distributed by Pera Systems Inc Page 47 v1 2 ...
Page 53: ...WiMi6200 User s Manual Distributed by Pera Systems Inc Page 52 v1 2 ...