Nimbus Water Systems WIMI6200, User Manual, Page: 30 / 72

WiMi6200 User’s Manual
 This DIP switch is used to set the system identification number of the
WiMi6200RW system when the WiMi6200TW/RW was configured to wireless
multicast mode through the web page.

There can be maximum 4 receivers, which can display same A/V data from
the one transmitter.
 This setting has no meaning in LAN mode.
 Wi-Fi Ch.

This DIP switch is used to set the SSID of the WiMi6200RW. The changes of
the DIP switch setting will be effective on the fly during operation.
 This setting must be same with the setting of the WiMi6200TW.

In case of wireless multicast mode, this setting of DIP switch must be same
with the WiMi6200TW.
 A specific setting this DIP switch to position switches the
WiMi6200RW system to the LAN mode. And the change of DIP switch setting
from position to other positions shown on table-2 in section 1.5.1
will switch the system to Wi-Fi mode with specific SSID and frequency.

The mode change from Wi-Fi mode to LAN mode will be effective on the fly,
but the change from LAN mode to Wi-Fi mode will reboot the WiMi6200R.
Distributed by Pera Systems, Inc. Page 29 v1.2