S e room
System
189
Ser
e
S
Maintenance and Adjustments
Side Broom Height Check and Adjustment
1RWH
%URRPVZLWKKDUGHURUVRIWHU
EULVWOHVDUHDYDLODEOH7KLV
procedure is applicable to all
types of brooms.
1.
&KHFNWKHVLGHEURRPGLVWDQFHIURPWKHJURXQG
DFFRUGLQJWRWKHIROORZLQJSURFHGXUH
'ULYHWKHPDFKLQHRQDOHYHOÁRRU
.HHSWKHPDFKLQHVWDWLRQDU\ORZHUWKHVLGH
brooms and turn them on for a few seconds.
6WRSDQGOLIWWKHVLGHEURRPVWKHQPRYHWKH
machine.
Check that the side broom prints are as
VKRZQLQWKHÀJXUH$DQG%
,IWKHSULQWLVQRWZLWKLQVSHFLÀFDWLRQVDGMXVW
the side broom height according to the following
procedure.
2. Engage the parking brake.
3. Turn the ignition key to “0”.
4. Turn the fasteners and remove the left or right
door.
5.
)RUWKHULJKWVLGHEURRPRSHUDWHRQWKHLGOH
gear by loosening the ring nut (C) and by
adjusting the adjuster (D) until the correct print
(A) is achieved. Finally lock the adjuster (D) into
position with the ring nut (C).
)RUWKHOHIWVLGHEURRPRSHUDWHRQWKHLGOHJHDU
by loosening the ring nut (E) and by adjusting
the adjuster (F) until the correct print (B) is
achieved. Finally lock the adjuster (F) into
position with the ring nut (E).
6. Perform step 1 again to check the proper
adjustment of the side broom height.
7. When the broom is too worn and can no
ORQJHUEHDGMXVWHGUHSODFHLWDFFRUGLQJWRWKH
procedure shown in the relevant paragraph.
A
B
C
F
E
D
P200186
Summary of Contents for SW4000
Page 233: ......
