Hopper System
150
Ser
e
S
Hydraulic Cylinder Disassembly/Assembly
Disassembly
1.
'ULYHWKHPDFKLQHRQDOHYHOÁRRU
2. Ensure that the hopper is closed.
3. Turn the ignition key to “0” and engage the
parking brake.
4. Open the battery/engine compartment hood with
the handle and fasten it with the support rod.
5.
5HPRYHWKHPDFKLQHULJKWVLGHEXONKHDGE\
lifting it to disengage it from the fasteners.
6.
8QVFUHZWKHFRQQHFWLQJÀWWLQJV%RIWKH
hydraulic cylinder hoses (C).
Collect the hydraulic system oil in a proper
container.
3OXJWKHGLVFRQQHFWHGÀWWLQJVWRSUHYHQWGHEULV
from entering into the hydraulic system.
Warning!
Hydraulic system oil is highly
corrosive.
Warning!
The hydraulic system oil
should be disposed of
properly according to the Law
in force.
7. Remove the screw (D) and remove the lower pin
(E) of the cylinder.
8. Remove the cotter pin and the upper pin (F) of
the cylinder.
9. Remove the cylinder (C).
Assembly
10. Assemble the components in the reverse order of
GLVDVVHPEO\DQGQRWHWKHIROORZLQJ
After the installation of the cylinder (either
WKHVDPHF\OLQGHURUDQHZRQHÀOOWKHWDQN
ZLWKK\GUDXOLFRLOXSWRWKH0D[OHYHOWKHQ
run some hopper handling (the hydraulic sys-
WHPLVVHOIEOHHGLQJWKHQFKHFNWKHK\GUDX
-
lic system oil level.
B
F
E
D
C
P200164
Summary of Contents for SW4000
Page 233: ......
