room
System
181
Ser
e
S
Main Broom Gas Spring Disassembly/Assembly (Continues)
6.
,QIURQWRIWKHPDLQEURRPORRVHQWKHQXW)RIWKHJDVVSULQJV*
7. Insert and tighten the screw with a 8 mm nut (H) in the hole (I).
8.
,QVHUWDOHYHU-EHWZHHQWKHVFUHZ.DQGWDVVKRZQLQWKHÀJXUHWKHQSXVKLWLQWKH
direction shown by the arrow until the screw (K) is disengaged by its housing and moved to the position
(L) (thus the gas spring (G) will be extended).
9. Unscrew the nut (M) and remove the screw (N).
Caution!
Pay attention to the release of the gas springs (G) due to any residual tension.
10. Remove the gas springs (G).
Assembly
11.
$VVHPEOHWKHFRPSRQHQWVLQWKHUHYHUVHRUGHURIGLVDVVHPEO\DQGQRWHWKHIROORZLQJ
7RSODFHWKHVFUHZV/EDFNLQWKHKRXVLQJ2WKHVFUHZPXVWEHWXUQHGWRSRVLWLRQ3
WKHQSODFHWKHOHYHU-LQWKHSRVLWLRQ4DQGSXVKLWLQWKHGLUHFWLRQVKRZQE\WKHDUURZDVVKRZQ
LQWKHÀJXUH
12. Adjust the main broom height.
M
G
F
G
I
N
L
P
L
J
F
G
K
H
O
Q
P200218
Summary of Contents for SW4000
Page 233: ......