Electrical System
26
Service Manual – SC351
Fuse Check and Replacement
Fuses in the electric component box
1
Drive the machine on a level floor.
2 Check that the function selection knob is turned to “0” and disconnect the battery connector
3 Open the cover and check one of the following fuses for deactivation or integrity:
◦
(A): brush motor fuse circuit breaker (F1) 35 A
◦
(B): vacuum system motor blade fuse (F2) 30 A
◦
(C): function selector blade fuse (F3) 5 A
4 Reset or replace any fuse, after having checked and repaired any problem that caused deactivation
5 Close the cover
C
B
A
P100784
