Nilfisk-Advance BA 651, User Manual

Page: 76 / 124

ENGLISH USER MANUAL
1
9097293000(1)2008-03 A
BA 651 - BA 751 - BA 851 - BA 751 C
Brush/pad-holder installation/removal (for BA 601(*) / BA 651 / BA 751 / BA 851)
According to the kind of cleaning to be performed, the machine can be equipped either with brushes (A, Fig. 2) or pad-holders
(B) with pads (C) together with the appropriate deck.
Insert the ignition key (80) and turn it to “I”.
Turn the speed adjuster (84) to idle by turning it counter-clockwise.
Place the brushes (A) or the pad-holders (B) under the deck (18).
Lower the deck on the brushes/pad-holders by pressing the switch (71).
To engage the brushes/pad-holders, press the drive paddle (83) and then release it. If necessary, repeat the procedure until
the brushes/pad-holders are engaged.
WARNING!
Turn the speed adjuster (84) counter-clockwise to run the machine at idle speed.
Do not press the paddle (83) completely, otherwise the machine will start moving.
A slight pressure on the paddle is enough to engage the brush/pad-holder and to turn on the relevant motor.
To remove the brushes/pad-holders, the deck must be lifted by pressing the switch (71), then press the switch (75) and wait for
the brush/pad-holder to fall on the floor.
Turn the ignition key (80) to “0”.
(*) Optional model
Figure 2
S311334
Types of brushes available
305 mm-models for BA 601
(*)
330 mm-models for BA 651 355 mm-models for BA 751 30 mm-models for BA 851
PROLENE PROLENE PROLENE PROLENE
MIDLITE GRIT 180 MIDLITE GRIT 180 MIDLITE GRIT 180 MIDLITE GRIT 180
MIDGRIT 240 MIDGRIT 240 MIDGRIT 240 MIDGRIT 240
PROLITE PROLITE PROLITE PROLITE
UNION MIX UNION MIX UNION MIX UNION MIX
(*) Optional model
Brush/pad application guide
Models MIDLITE GRIT 180 MIDGRIT 20 PROLENE PROLITE UNION MIX
General cleaning:
Concrete
Terrazzo floor
Ceramic tiles/quarrystones
Marble
Vinyl tiles
Rubber tiles
Polishing:
Rubber tiles
Marble
Vinyl tiles
1.
2.
3.
4.
5.
6.
7.
8.