Nilfisk-Advance BA 651, User Manual

Page: 80 / 124

ENGLISH USER MANUAL
18
9097293000(1)2008-03 A
BA 651 - BA 751 - BA 851 - BA 751 C
Detergent flow adjustment
(For machines with EDS™ - ECO Dosage Solution)
To check the actual setting of the detergent percentage to be added to the washing water, perform the following procedure:
Press and turn off the detergent switch (A, Fig. 4) [the warning light (B) must be off].
Press the detergent switch (A). 3 seconds after pressing the switch, the indicator (C) turns on, thus indicating the percentage,
as shown in the figure.
To change the actual setting of the detergent percentage to be added to the washing water, perform the following procedure:
Press and turn off the detergent switch (A, Fig. 4) [the warning light (B) must be off].
Press and hold the detergent switch (A) until the warning light (B) flashes (after about 5 seconds).
Release and press again the detergent switch (A), to go to the next percentage shown by the indicator (C); repeat the
procedure until the desired setting is reached.
Wait for the warning light (B) to turn off and for the indicator (C) to show the washing water flow: the new percentage value is
now set.
NOTE
Detergent percentage setting is stored into memory, even if the machine is turned off.
Figure
P100177
1.
2.
3.
4.
5.
6.