We
reserve the right to make changes
Page 19 of 49
Superuser/ Installer – Program settings
Week programs – Add program
All settings have a start time, which is the time during a 24-hour period in which the program must
start.
There are four basis settings in the weekly schedule.
1. Automatic
a. Set point (°C)– Air intake temperature ventilation
b. SHW setpoint(°C) – Hot water production temperature
c. Fan setting – Ventilation step %
2. Night-time drop
a. Setpunkt (°C) – Air intake temperature ventilation
b. SHW setpoint(°C) – Hot water production temperature
c. Fan setting – Ventilation step %
3. Fan only
a. SHW setpoint(°C) – Hot water production temperature
b. Fan setting – Ventilation step %
4. From
a. System is OFF.
CP – User selection programs
You can select one of two user selection programs to override the system using an external signal.
1. User programs 1
2. User programs 2
User selection 2 has highest priority and an output that can transmit signals to other units.
User selection 2 is used to manage cooker hood solutions, in which the cooker hood gives 1) a
signal to the system when extra ventilation is required and 2) an output signal to an EM box (if any)
or motor valve.
All settings determine the interval for how long a user selection may run.
There are four basis settings in the weekly schedule.
1. Automatic
a. Setpunkt (°C) – Fresh air temperature ventilation
b. SHW setpoint(°C) – Hot water production temperature
c. Fan setting – Ventilation step %
2. Night-time drop
a. Setpunkt (°C) – Fresh air temperature ventilation
b. SHW setpoint(°C) – Hot water production temperature
c. Fan setting – Ventilation step %
3. Fan only
a. SHW setpoint(°C) – Hot water production temperature
b. Fan setting – Ventilation step %
4. OFF
a. The system is off.
