Nikon WT-3, User Manual

Page: 31 / 321

20
9
Enter wireless network settings and click Next .
• Network name (SSID) : Enter a network name or
choose from a list of existing networks ( 49).
Do not change the name if it is supplied auto-
matically.
• Network type : Infrastructure or ad-hoc ( 49).
• Channel (ad-hoc networks only): Choose the
channel (1–13) used by the host. If channel 12
or 13 is selected for the WT-3A, channel 11 will be used instead.
• Authentication : Choose the type of authentication used by the computer or
access point. The camera supports WPA-PSK, WPA2-PSK, open system, and
shared key authentication. WPA-PSK and WPA2-PSK are available only in in-
frastructure mode.
• Encryption : Choose the type of encryption used on the network. Depending
on the authentication used, the following types of encryption are available:
Open : none, 64-bit WEP, 128-bit WEP Shared : 64-bit WEP, 128-bit WEP
WPA-PSK : TKIP, AES WPA2-PSK : AES
• Encryption key : If the network uses encryption, enter the network key. The
number of the characters required depends on the type of encryption
used:
WEP (64-bit) WEP (128-bit) TKIP, AES
Number of characters (ASCII) 5 13 8–63
Number of characters (hexadecimal) 10 26 64
• Key index : In infrastructure networks that use WEP encryption, enter the host
or access point key index. The default index is 1.