Nikon WT-3, User Manual

Page: 21 / 321

10
Installing the WT-3 Setup Utility
The WT-3 Setup Utility is used to copy computer and printer profi les to the camera.
The WT-3 Setup Utility is required when confi guring the camera for connection to
a computer in transfer, PC, and print modes. Either the WT-3 Setup Utility or the
camera menus ( 61) can be used for connection to ftp servers in transfer mode.
Follow the steps below to install the WT-3 under Windows XP or Mac OS X.
Supported Operating Systems
The WT-3 Setup Utility is compatible with Mac OS X version 10.3 or later
(Power PC G4/G5 CPUs only) or a pre-installed version of Windows XP Service Pack
1 or later (Service Pack 2 recommended).
Windows XP Service Pack 1 or Later
1
Start the computer and log in to an account with administrator privileges.
2
Insert the supplied installer CD in a CD-ROM drive.
The “Select Region” dialog will be displayed; select
a region and click
Next .
If the “Select Region” Dialog Is Not Displayed
If the “Select Region” dialog is not displayed, select My Computer from the
Start menu and double-click the icon for the CD-ROM drive containing the
installer CD.
The WT-3 Setup Utility
The WT-3 Setup Utility supplies the computer with information about the camera
and controls image transfer. It must be installed on each of the host computers
used by the WT-3. The WT-3 Setup Utility is not required for upload to an ftp server
in transfer mode.
3
Select a language and click Next .