Nikon WT-3, User Manual

Page: 9 / 321

vi
CAUTION : This class B digital apparatus
meets all requirements of the Canadian
Interference Causing Equipment Regula-
tions.
ATTENTION : Cet appareil numérique de la
classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du
Canada.
Notices for Customers in Canada
RSS-GEN Exposure of Humans to RF Fields
This equipment complies with both FCC and IC radiation exposure limits set forth
for an uncontrolled environment. When the Wireless Transmitter is connected
with the WA-E1 extended range antenna, it is considered as a mobile radiator and
should be installed and operated with a minimum distance of 20 cm between the
radiator and your body. The installer of this radio equipment must ensure that the
antenna is located or pointed such that it does not emit RF fi eld in excess of Health
Canada limits for the general population; consult Safety Code 6, obtainable from
Health Canada’s website at
http://www.hc-sc.gc.ca/rpb
.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
This device has been designed to operate with the antenna listed below, and
having a maximum gain of 3.0 dB. Antennas not included in this list or having a
gain greater than 3.0 dB are strictly prohibited for use with this device. The required
antenna impedance is 50 ohms.
• The WA-E1 extended range antenna (available separately)
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that permitted for successful communication.