11
Traffi
c Level
A
The traffi
c on each channel can be
gauged by pressing
2
for about a sec-
ond. The traffi
c level for each channel
is shown by an icon; choosing a low-
traffi
c channel improves performance.
Note that the display varies depend-
ing on when it was last updated; when
multiple WR-1 units are used, their
displays will not necessarily show the
same traffi
c levels.
(No icon)
No traffi c
Heavy
traffi c
Erasing Pairing Data
Selecting
DELETE
in the WR-1
PAIRING
menu lists the devices with
which the unit is paired, identifi ed by the last three digits of their serial
numbers. Highlight a device and press
z
. A confi rmation dialog will
be displayed; highlight
YES
and press
z
to erase the pairing data for
the selected device.
ID Mode
In ID mode, connections between WR-1 units can be established
based on the unit name rather than device pairing (
0
23).
The
Fn
Button
The transmitter
Fn
button performs the same function as the
Fn
but-
ton on the camera to which the receiver is connected (D4, D800/800E,
D7100, and D5200 cameras only; for the latest information on sup-
ported cameras, visit the websites listed on page viii). For more infor-
mation, see the camera manual.
Device Selection
To control a specifi c receiver, press the
SEL
button on the transmitter
and highlight the receiver in the device selection menu.
A
A
A
A
Summary of Contents for WR-1
Page 39: ......
