21
Relay
Receivers can be confi gured to relay transmitter commands to an-
other receiver, increasing transmitter range and allowing signals to
be transmitted around obstacles.
Transmitter
Relay
Receiver
1
Confi gure the relay.
On the unit that will act as the relay, slide the
Tx/Rx/OFF
switch to
Rx
. Press the
MENU
button
to display the menus, then highlight
SPECIAL
and press
2
. Highlight
RLY
and press
z
to
confi gure the unit to act as a relay.
2
Confi gure the remaining units.
Slide the
Tx/Rx/OFF
switch on one of the re-
maining units to
Tx
to confi gure it as a trans-
mitter, and the switch on the other unit to
Rx
to confi gure it as a receiver.
3
Take photographs.
Position the units. When the shutter-release button on the trans-
mitter is pressed all the way down, the relay unit will pass the sig-
nal to the receiver, and the receiver will release the shutter on the
camera to which it is connected.
Summary of Contents for WR-1
Page 39: ......
