8
Using the WR-1: The Basics
Using the WR-1: The Basics
The instructions that follow describe how to control a single camera
using two WR-1 units, one functioning as a transmitter and the other
as a receiver.
Step 1: Position the Tx/Rx/OFF Switches
Step 1: Position the Tx/Rx/OFF Switches
Slide the
Tx/Rx/OFF
switch for the transmitter
to
Tx
and the switch for the receiver to
Rx
. The
units will turn on and display the information
shown below.
Tx (transmitter)
Rx (receiver)
Step 2: Set the Units to the Same Channel
Step 2: Set the Units to the Same Channel
Press
1
or
3
to choose from channels 1 to 15.
Transmitters must be set to the same channel
as the receivers they control.
Summary of Contents for WR-1
Page 39: ......
