manualshive.com logo in svg

Nikon D100, Manual

Share
Download
Nikon D100 Manual Download Page 109

Taking Photographs—Flash Photography

Using Built-in and Optional Speedlights

97

Red-Eye Reduction

Depending on the lens used and the position of your subject, the AF-assist illuminator
(red-eye reduction lamp) may not be visible to your subject, with the result that red-eye
reduction may not have the desired effect.

Studio Flash Systems

Rear-curtain sync can not be used with studio flash systems, as the correct synchroniza-
tion can not be obtained.

Flash Sync Modes for Optional Speedlights

Front- and rear-curtain sync modes for SB-series 26, 25, and 24 Speedlights is set using
the sync mode selector on the optional Speedlight.  If red-eye reduction or slow-sync
with red-eye reduction is selected with an SB-series 80DX, 28DX, 28, 27, or 26 Speed-
light attached, the Speedlight red-eye reduction lamp will be used.

Summary of Contents for D100





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands