Nikon 25414, Manual

Page: 280 / 288

266
Technical Notes—Specifi
cations
2
Plug the wall plug into a power outlet. The charge and calibration lights
will remain off.
3
Insert the battery (terminals fi rst), aligning the
end of the battery with the guide and then
sliding the battery in the direction indicated
until it clicks into place. Charging will begin
when the battery is inserted. The charge state
is shown by the charge lamps:
Charge state
Charge lamps (green)
50% 80% 100%
Less than 50% of maximum
capacity
Blinks Off Off
50–80% of maximum
capacity
Glows Blinks Off
More than 80% but less
than 100% of maximum
capacity
Glows Glows Blinks
100% of maximum capac-
ity
Glows Glows Glows
4
When charging is complete, slide the battery out of the charger and un-
plug the charger.
When the charger is not in use, replace the contact protector to prevent dust
from accumulating on the charger contacts.
Using the Charger
1
Plug the AC adapter plug into the battery
charg er.