manualshive.com logo in svg

Nikon 25414, Manual

Share
Download
Nikon 25414 Manual Download Page 205

191

Menu Guide—Custom Settings

Custom Setting b1: 

ISO Auto Control

If 

On

 is selected for this option, the cam era will au to mat i cal ly adjust ISO sen-

sitivity when necessary to help ensure optimal exposure.  This op tion is not 
available at ISO sensitivities over 800.

Highlight 

b1 ISO auto 

in the second level of the 

CSM menu (

 180) and press the multi selector 

to the right.  Press the multi selector up or down 
to highlight an option, then press to the right to 
make a selection.

Option

Description

Off

(default)

ISO sensitivity remains fi xed at value selected by user, regardless of 
whether optimal exposure can be achieved at current ex po sure set-
tings.

On

If optimal exposure can not be achieved at ISO sensitivity selected 
by user, ISO sensitivity is adjusted to compensate, to minimum ap-
proximately equivalent to ISO 100 and maximum selected using 

Max. 

Sensitivity

 option.  In exposure modes 

P

 and 

A

, ISO sensitivity will be 

adjusted if photo would be overexposed at shutter speed of 

1

/

8 ,000

 s or 

underexposed at value selected for 

Min. Shutter Speed

.  Otherwise 

camera adjusts ISO sensitivity when limits of exposure metering system 
are exceeded (mode 

S

) or when optimum exposure can not be achieved 

at shutter speed and aperture selected by user (mode 

M

).  ISO sensitivity 

can not be set to values over 800 while this option is in effect.

Max.

sensitivity

Menu shown at right is displayed.  Press multi 
selector up or down to highlight desired ISO 
sensitivity and press to right to return to ISO 
auto menu.

Min.

shutter 

speed

Menu shown at right is displayed.  Press multi 
selector up or down to highlight desired shutter 
speed and press to right to return to ISO auto 
menu.

Summary of Contents for 25414

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands