Presence detectors 360° KNX/KLR RA/EA
for ceiling flush-mounting
The family of
Swiss Garde 360 Presence KNX/KLR RA/EA
presence detectors is characterised by the following
outstanding features:
•
2 -channel constant light control
The in-built 2-channel constant light control can be easily
adjusted to meet any customer’s needs.
The two light channels can be controlled via a
parametrizable offset.
(-50%, synchronous, +50%) using different light values.
•
1 light output
for switching, dimming or scenery selection.
•
Standby light
If the light channel is set to
dimming absolute
, an
emergency standby light can be programmed using the
standby value [%] and standby duration [min/h]. Two value
pairs can be read out from the KNX bus.
•
1 HVAC-channel
controls heating, ventilation and air
conditioning. This output can be used for presence
detection. Additionally, alarm systems with parametrizable
switch-on delay can be implemented.
•
1
Threshold switch
in lux with hysteresis setting
•
1 brightness output
in lux
(2 Byte)
•
3 Pyro detectors
Three PIR sensors with an 360° detection area can be
activated individually or in pairs.
2
