3
Important notice
The presence detectors Swiss Garde 360 Presence
KNX/KLR RA/EA/EB is suitable for ceiling mounting indoors
only. In case of errors such as continuous light, uncontrolled
switching, etc., please consult page 7 „troubleshooting“.
Function
The presence detector Swiss Garde 360 Presence KNX/KLR
RA/EA/EB reacts to heat radiation of moving bodies. A
person approaching the monitored area automatically trig-
gers the connected light. If no motion is detected again, the
light will automatically switch off after a delay time configured
in ETS. In case of activated standby, the light will stay on at
reduced intensity during the set time period (mode
dimming
complete/ constant light control
).
Installation
Connect the presence detector as follows:
red wire
(+)
to be connected to red terminal
black wire (-)
to be connected to grey terminal
Application notes
A detailed description of the communication objects and all
parametrizable functions can be found in the following
separate document:
Swiss Garde 360 Presence KNX/KLR RA/EA/EB
APPLICATION NOTES
3
