background image

 

 

 

 

 

 

Technical data 

nominal voltage:

           24V DC (21 - 30V DC) 

power consumption:

       0,4 W 

PIR- sensors:

 

   3 Pyro detectors 

sensitivity:

 

   adjustable via ETS in 10 steps 

light measuring:

             brightness sensor with linear output 

lux value: 

   value readable (5 - 2000lux, 2 Byte) 

switiching criteria:

          motion and brightness 

detection range:             

360°, ceiling mounted 

r

 

ange 

height= 3m/ 

RA 16m

:   

Ø6m presence, Ø14m motion 

range 

height= 3m/ 

RA 30m

:

   Ø7m presence, Ø26m motion 

recom. mounting height

:

  

2m – 6m (25032

, 25034

 

2m – 8m (25036) 

ceiling or false- ceiling mounting   

AP/UP- housing, IP55 -housing    

IP 20, indoor mounting, class II 

- 20°C bis +40 °C

mounting:

available accessory

:

    

protection rating:

      

temperature range:  

dimensions:       

RA

  16  m:  Ø105  x  44  mm

RA

 30 m: Ø105 x 

51mm

RA

 16 m 

EB

: Ø105 x 51 mm

PM

35032_35034_35036

R2150

3

_EN

Warnings regarding installation

The installation of products that will permanently be part of the electrical installation and which 
include dangerous voltages, should be carried out by a qualified installer and in accordance 
with the applicable regulations. This user manual must be presented to the user. It should 
be included in the electrical installation file and it should be passed on to any new owners. 
Additional copies are available on the Niko website or via Niko customer services. 

CE marking

This product complies with all of the relevant European guidelines and regulations. For radio 
equipment Niko llc declares that the radio equipment in this manual conforms with the 2014/53/
EU directive. The full text of the EU declaration of conformity is available at www.niko.eu under 
the product reference, if applicable.

Environment

This product and/or the batteries provided cannot be disposed of in non-recyclable waste. Take 
your discarded product to a recognised collection point. Just like producers and importers, 
you too play an important role in the promotion of sorting, recycling and reuse of discarded 
electrical and electronic equipment. To finance the rubbish collection and waste treatment, the 
government levies recycling charges in certain cases (included in the price of this product).

Summary of Contents for SG360KNX/KLR RA 16 m









Reviews: