©
2023 QG V2 BRD03 DualRay and LED Display
1
QUICK GUIDE
25 August 2023, V2
BRD03 DualRay and LED Display Traffic Detector
Technical Specification
Description
Parameter
Input Voltage
DC 12V, 250mA
Detection
Dual Lens for 3D Detection
Working Frequencies
24 - 24.5 Ghz
Modulation Mode
FMCW
Transmission Power
10 - 15 dBm
Detection Distance
1 - 6 meters, ± 0.2 meters
Working Temperature
-40°C - 85°C
IP Rating
IP67
Dimension
126mm(L) x 96mm(W) x 26mm(H)
Cable Colour
Description
Red
12V
Black
GND
Yellow
N.O SIGNAL
Blue
N.C SIGNAL
White
COM SIGNAL
Green
Not In Use
Installation and Wiring
Menu selection
Setting instruction:
1. Press and hold the “MENU” button for 3 seconds.
2. The LED Display show first menu which is “RANGE”.
3. Press the “MENU” button again to change to other
parameters
4. To set the value, press “SET/SAVE” button
5. After done, press and hold the “SET/SAVE” button until
the LED flash then let go the button, it will automatically
save and exits the menu.
6. Once complete, LED Display will back to Normal.
*(Note: After done any setting, it must be saved;
otherwise the setting will not change and the detector will
automatically exit the menu setting after 10 seconds)
RANGE Setting
SPEED Setting
MODE Setting
DELAY Setting
