EN
36
10-286 / 10-386
2.4.4. Dome camera module (10-386)
1
Dome
camera
2
Integrated
two-wire video transmitter
10-498
3
Terminals
bus
and video
Technical data:
Power supply
+ 24V ± 8 % (power supply and control device), +26 V /
DC (from P-conductor)
Housing
Anodized aluminium
Lens
Acrylic glass
Camera screen
Plastic
H x W x D
125 x 105 x 42 mm
Weight
455 g
Allowable ambient temperature
-10°C to +50°C
Input current in standby
I(P) = 0 mA
I(P) = 60 mA
Max. input current
I(P) = 60 mA
Video signal
Symmetric 1Vss FBAS
Camera type
Black Light Compensation (BLC), Auto Gain Control (AGC),
Auto White Balance (AWB)
0,8 cm (1/3 inch)
Resolution
700 lines (TVL)
Light sensitivity
0,002 lux / F 1,2
Lens
F1,2, board lens
Focal point
f = 3,6 mm
Angle
± 90° diagonally
Cabling
6-wire cabling
Note:
Recommended mounting height of the camera: 1.60 m to 1.70 m.
Short description:
• The high-resolution image sensor ensures that all image points can be optimally adjusted.
• The output level of the 2-wire video signal from -3 dB to 9 dB is manually adjustable.
3. INSTALLATION
3.1. Cabling
Which type of cable should I use?
The external audio unit 10-286 is wired with a 3-wire twisted cable for optimal quality. The diameter of the wires will determine the maximum distance between
the power supply and the internal or external unit. The table below provides an overview of the maximum distance per type of cable.
10-286
Cable diameter
Maximum distance
0,5 mm (UTP)
100 m
0,6 mm (bv. TPVF)
160 m
0,8 mm (bv. SVV, TVVF, JYSTY, …)
280 m
The external video unit 10-386 is wired with a 6-wire twisted cable for optimal image quality. The diameter of the conductors determines the maximum distance
that can be bridged between the power supply and the internal video unit, or between the power supply and the external video unit. The table below provides
an overview of the maximum distance per type of cable.
10-361
V2
V1
M
P
b
a
1
2
3