35
EN
10-286 / 10-386
• 3 function keys with visual indication (smart keys) for easy control
• Connection via 4-pole connector of the audio module 10-360
• Extra connection for splitting to another module
• Outgoing confirmation tone via central module (e.g. audio module)
• Visual error indication
• Resident database: 256 data sets (24 characters for the name, 6 digits for the flat number, 2 serial numbers per resident, call number of up to 10 digits for
direct dialing)
• Configuration only using Niko Configuration SW
Factory settings display module:
Time-out for backlight in automatic mode
30 s
Error detection “key is locked” (key pressed for
longer than 25 s)
25 s
2.4.3. Code lock module
1
Two-tone LED
OFF
: in standby
ON red
: 3 sec. – entered code denied
2 min – blocked after three wrong codes,
Blinking green:
programming mode active
ON green
: entered code approved (can be deactivated, duration adjustable)
Blinking ON green
: programming mode started on the power supply and control unit
Blinking ON red and green (orange
): combined error indication
2
Number keys
Input of access codes,
input of series of commands and parameters during config-uration
3
-key
Start series of commands during configuration in programming mode, interruption of
incomplete series of commands
4
-key
Complete entered commands and codes, separate parame-ters of entered commands (
example:
0
3
),
Light function
5
Connection
Extra module with 4-pole connection cable (e.g. display module 10-362 or audio module
10-360)
6
Connection
Extra module with 4-pole connection cable (e.g. display module 10-362)
7
Connection
bus and output
Technical data:
Housing
Anodized aluminium
H x W x D
105 x 105 x 43 mm
Weight
210 g
Short description:
• Keyboard with 12 keys for entering flat numbers, access codes and resident selection.
1
2
3
4
5
6
7
8
0
9
EXT EXT
a b P NO COM NC
10-363
1
2
4
3
5 6
7