OPERATING THE BIAXIAL BODY ENERGIZER
You can use the Biaxial Body Energizer while working at a desk, watching television,
relaxing — any activity when you want to put up your feet and be comfortable.
The Biaxial Body Energizer is designed for use while seated. DO NOT stand on the unit
when it is operating or when it is switched off. Do not sit on it.
DO NOT place excessive downward force on the unit while it is operating. Remove feet
from the Biaxial Body Energizer when turning it on or off or when adjusting the speed
setting. Leaning forward to reach these controls with feet on the unit may cause the top
surface to come into contact with the rotating spheres and stop their motion.
Place the Biaxial Body Energizer in front of a chair or seat. Make sure the energizer is
placed so that the front of the unit points forward.
Connect the adapter plug to a standard 100/120-volt outlet. Insert the other end of the
adapter cord into the receptacle on the unit.
For best results, remove your shoes before placing your feet on the Body Energizer. Socks
or stockings may be worn if desired.
Locate the power switch and turn it to activate the unit. The speed is selectable from 500
to 1,500 revolutions per minute. An LED readout on the top surface indicates the speed
when operating.
After some experience with the Biaxial Body Energizer, you can find the power/speed that
is most comfortable for you.
Nikken recommends using the Energizer for a period of 10-15 minutes with the unit activated.
You can also keep your feet on the Biaxial Body Energizer with the power turned off.
-3-
1
3
6
2
5
4
Footplates with
massaging surface
Power level/rpm
indicator
Biaxial magnetic
spheres (six)
Carrying handle
On/off/speed switch
AC adapter
1
2
3
4
5
6
