Nihon Bisoh BISOMAC308, Operator'S Manual

Page: 6 / 58

3
Nihon Bisoh Co., Ltd. BISOMAC308 1Phase&3Phase MM2015/9 KH-2015001
1. FOR SAFE USE
1.1 General
This Operator's Manual is applicable to the BISOMAC308 Electric Traction Hoist
manufactured by Nihon Bisoh Co., Ltd. The BISOMAC308 consists of Hoist Device
(referred to as “Hoist”) and Overspeed Detection Device.
A) Read and fully understand this manual before using the BISOMAC308.
B) The BISOMAC308 is designed for vertical ascent and descent of
personnel-carrying suspended platforms. The BISOMAC308 should only be
used for this purpose.
C) All operators must be fully trained in the use of the equipment including its safety
features.
D) Daily Tests and Inspections described in Section 7 must be performed at the
start of each work shift.
E) Use Section 9 troubleshooting guide in this manual to solve problems.
Understand the problem before attempting to solve it.
It is very important that anyone using the BISOMAC308 determine for themselves
whether the BISOMAC308 is safe. You must be familiar with the operating
characteristics of the BISOMAC308. You must understand how the BISOMAC308
will interact with other equipment and it is very important to confirm safety of the
whole platform. You must also be certain not to jeopardize yourself or others, or
cause damage to the surroundings, or the BISOMAC308.
1.2 Maintenance
Handling, maintenance, inspections and repairs of the following products must be
performed by trained personnel only who have been read the BISOMAC308
Maintenance Manuals (another sheet).
BISOMAC308 consists of:
I. Hoist Device
II. Overspeed Detection Device
NOTE:
There are individual maintenance manuals for the hoist and safety devices.