Nihon Bisoh BISOMAC308, Operator'S Manual

Page: 51 / 58

1-3
1-2
4
9
5
6
7
3
2
16
1-1
2. Inside of Control Box Cover and Control Box 3. Part Name and Part Function
【
Control Box Cover
】
No Tag No.
Part Name Function
1-1
MC-1 Electromagnetic contactor for Starting Motor Starts motor
1-2 MC-2 Electromagnetic contactor for Running Motor Controls rotation of motor.
1-3 MC-3 Electromagnetic contactor for Emergency Stop Shut down the main power.
2 Cr Condenser
Controls the descending speed at the time of manual brake
release.
3
AD Brake Power Supplies the power to the electromagnetic brake.
4 VA Varistor Prevents the contact from being damaged by surge voltage.
6 J-B P-B Control Box Connector Connects the Control box and the Control box cover.
7 PB Ascending/Descending button
Controls the electromagnetic contactor and electromagnetic
brake.
8
EMS Emergency Stop Switch Turns off the power to the control circuit.
9 HM Operating time integrating meter Displays the operating time.
16 TB2 Terminal Block Connects and branch wires
19 PB / EMS
OS / RP
PB
：
Power supply injection lamp
EMS
：
Emergency Stop Activation Lamp
OS: Overspeed Activation Lamp
RP: Reversed Phase Detection Lamp
Inform the working conditions of the device to operator by
lighting and lights out of the lamp
【
Control Box
】
No Tag No.
Part Name Function
5 RPR
Reverse Phase Detection devic
e
Shut down the power when Reversed Phase is detected.
10 P0 Power Plug Connect the power cable.
11 CN0 Power Cable Ground Secures the power cable.
13 J14 Socket for the Overspeed Detection Device Connect the interlock of the Overspeed Detection Device
14 J-M P-M Motor Connector Connects the motor and the control box.
15 CN2
Socket for the Pendant Switch
(OPTION)
Connect the Pendant Switch.
Pendant Switch is optional and need to convert with special
kit. Please contact with BISOMAC308 local distributor.
17 TB1 Terminal Block Connects and branch wires
18
TB3 Terminal Block Connects and branch wires
20
E Ground
Prevent damage and electric shock of the device by the
short circuit and over voltage
21
PENDANT
/ HOIST
Switching Connector of Pendant and Hoist
Switch the operation by connecting with
Pendant: Operation by Pendant Switch
Hoist: Operation by Switch button on the hoist.
Photo-1
Photo-2
【
Control Box Cover
】
【
Control Box
】
19
20
17
14
13
21
8
10
11
19
19
21
18
15
20
6