Nihon Bisoh BISOMAC308, Operator'S Manual

Page: 40 / 58

37
Nihon Bisoh Co., Ltd. BISOMAC308 1Phase&3Phase MM2015/9 KH-2015001
NOTE: DO NOT use wire rope that has been worn, kinked, bird caged or damaged.
Replace it with new wire rope
7.2.2 Preparation of the end of the wire rope
•
The end of the wire rope must be prepared for insertion into the
BISOMAC308, refer to Picture.3.
•
The end of the wire rope treatment is shown as below.
NOTE:
Improperly prepared bullet can cause the wire rope to jam in the BISOMAC308
and the wire may get stuck in the hoist.
5/16inch (8mm)
A.
Wire rope diameter
0.315inch.(8mm) to
0.33inch.(8.4mm)
B.
Braze distance
Within 0.197inch.(5mm)
R.
Top Radius
0.118inch.(3mm)
B
Fig. 13
Picture.3
A