Nihon Bisoh BISOMAC308, Operator'S Manual

Page: 23 / 58

Nihon Bisoh Co., Ltd. BISOMAC308 1Phase&3Phase MM2015/9 KH-2015001
20
WARNING
The wire rope should be able to go through the inside of the BISOMAC308 freely.
Inconsistent winding speed suggests the wire rope or the BISOMAC308 may be
damaged.
Stop operation at once and replace the wire rope or the BISOMAC308. If it
is used continuously, the wire rope may be severed or the BISOMAC308 may stop.
This may cause the platform to fall or tilt, and consequently operators or objects might
fall, resulting in serious injury, death or damage to operators or passers-by.
WARNING
DO NOT fasten or apply load to the tail end of the suspension wire rope
discharged from the BISOMAC308
. Otherwise, the internal parts of the
BISOMAC308 will become extremely worn and the wire rope may be damaged or
severed. This may cause the platform to fall or tilt, and consequently operators or
objects might fall, resulting in serious injury, death or damage to operators or
passers-by.
CAUTION
DO NOT put your hand near the wire rope inlet when self-reveeing the wire rope
and moving the platform up and down.
Otherwise, your hand may be caught in the
opening along with the wire rope, causing serious injury.
CAUTION
DO NOT throw or drop the BISOMAC308 . The BISOMAC308 may become damaged
and cannot be used and may result in serious injury or property damage.
CAUTION
DO NOT pull or step the cables of the safety device.
Lead the cables and connector to break, BISOMAC308 and Safety Devices cannot be
used.
CAUTION: BISOMAC 308 INSTALLATIONS