Night Owl H5 NVR SERIES, User Manual

Page: 61 / 80

61 Chapter 8:
Remote Access
For the following steps, use the information that you just wrote down. To access
the network settings on your NVR, go to the General Menu, then to Network >
Main and choose the Static option.
1. Manually enter the IP address into the IP Address field; this is the number
that ends with 150. You may have to add placeholder zeros for any sections
that do not contain three digits e.g. 192.168.1.150 > 192.168.001.150.
2. Confirm that the Subnet Mask is set to 255.255.255.000.
3. Enter the “Default Gateway” number from the prior section into the Gateway
field. Again you will need to add placeholder zeros in any sections that do not
contain three digits e.g. 192.168.1.1 > 192.168.001.001.