SD210 Series
Operating & Safety Instructions
English/USA – 07/11
Issue 06
36
4.8.2
TOWING
DO NOT TOW MACHINE WITHOUT FOLLOWING THE TOWING PROCEDURE AS
DESCRIBED IN SECTION 5.3.4 OF THIS MANUAL.
4.8.3
CRANEAGE
1)
Observe all of the limitations relating to straps and chains stated above under ‘Transporting’.
(4.8.1)
2)
When utilising the designated lifting points never apply a ‘snatch’ load, i.e. lift slowly to take up
the load before raising. Similarly, do not drop machine when positioning after lifting.
3)
If the machine is to be lifted by crane, use the designated lifting points and observe the
recommendations regarding spreader beams. Individual drawings are available for each machine
type, on request. (See list below.)
D81489
SD120
D80891
SD170
D81338
SD210
4.8.4
STORAGE
If being stored for any length of time without use, then the machine should be thoroughly inspected for
the following: -
1)
Grease all bearings /slides, worm drives, etc.
2)
If machine is to be left on an incline, chock wheels to prevent creep.
3)
If machine is to be left outdoors or in a hostile environment, cover with suitable weatherproof
media to prevent deterioration.
Summary of Contents for SD210 Series
Page 2: ......
