SD210 Series
Operating & Safety Instructions
English / USA – 07/11
Issue 06
15
3.3
PRE-OPERATIONAL SAFETY CHECK SCHEDULES
Before use at the beginning of the work shift, the aerial platform shall be given a visual inspection and
functional tests including, but not limited to the following. It is recommended that these be performed at
regular intervals as indicated on each checklist.
3.3.1
DAILY SAFETY CHECKS
1)
Check that all labels (decals) are in place and legible.
2)
Visually inspect the machine for damaged or loose components.
3)
Check that batteries are charged (if applicable) i.e. Charger has a solid green light and a pulsing
red light.
4)
Check the fuel level (if applicable).
5)
Check that canopies/covers and guards are in place and secure.
6)
Check that the boom rest switch is operable.
7)
Check that control levers are secure and operate freely.
8)
Check that operating buttons and emergency stop buttons function properly.
9)
Check the operation of the emergency hand pump.
10)
Visually inspect all hydraulic hoses and fittings for damage or leaks.
11)
Check operation of the outrigger alarm.
12)
Check that outrigger footpads are secure.
13)
Check that the platform pivot pins and their swing bolts are secure.
14)
Check the operation of the cage weigh system (If fitted). See section 4.7.3 for testing and
verification procedure.
3.3.2
WEEKLY SAFETY CHECKS
1)
Inspect tyres and wheels for damage and wear.
2)
Check tyres for correct pressure. 32 psi (2.2 bar)
3)
Check suspension and dampers for damage and leaks.
4)
Check that the joystick manipulators are secure.
5)
Check battery fluid levels and specific gravity (after charging) and general condition.
6)
Check hydraulic oil level, ISO Grade 22 (Europe), Grade 32 (Rest of World).
7)
Inspect the engine air filter and clean or replace if necessary.
8)
Check operation and security of outrigger micro switches in conjunction with the alarm system.
9)
Inspect hose track for damage or missing parts.
Summary of Contents for SD210 Series
Page 2: ......
