E. TROUBLESHOOTING
27
Always verify that the broiler is properly assembled, the hood is on and broiler is plugged in.
Nieco Corporation - Model JF74E CE
No power to broiler when the switch is
turned on.
Power is on, broiler is lit, but the conveyor
belts are not turning.
Feeder belt not moving.
Feeder jams.
Burgers sticking to slide or stripper blade.
COOKING PROBLEMS
Burgers under or over cooked.
Excessive flaming in broiler.
Check:
Broiler is plugged in.
Ventilation hood is on.
Circuit Breaker on wall panel is on.
Check for a jam in the conveyor belt. Check
the stripper blade and the flame arrestors to
make sure they are installed properly.
Make sure the feeder is assembled properly.
Check for jam.
Make sure the drive pin is engaged.
Make sure the burgers are not frozen togeth-
er.
Clean the slide and stripper blade very thor-
oughly.
Check cookout temperature (undercooking).
Main side: adjust conveyor belt speed.
Flex side: adjust conveyor speed and duty
cycle.
Clean or rotate the flame arrestors,
Clean the catalyst if equipped.
Check the hood for proper operation.
Check product for overcooking.
