Nieco 522G, Owner'S Manual

Page: 19 / 34

19
E. ASSEMBLY/DISASSEMBLY AND CLEANING
If this appliance is connected to the gas supply by a flexible gas line and quick disconnect coupling, it must also be con-
nected to a restraining device (see installation instructions). If the appliance is moved and then returned to its original
position, it must be reconnected to the restraining device and the casters locked before resuming operation.
1. Clear machine of all food products. Allow the machine to run for ten minutes empty in order to burn off the residue on
the belt. Turn Main Power and Motor switches off. Allow the machine to cool before you disassemble.
2. Remove the Side Panels by 2 3
lifting up and off. Wipe clean
with a degreaser.
FROM THE FRONT OF THE BROILER
3. Remove the Patty Feeder by
lifting up and out. Clean daily
using soap and water.
4. Remove the Upper Burner 4 5
Front Reflector, and clean
with soap and water.
5. Remove the Grease Pan by sliding
it out the front. Clean daily using
soap and water.
6. Remove the Belt Scraper. Notice 6 7
the position it sits in before
removing, so that you can replace
it properly. Clean daily using soap
and water or degreaser.
7. With a plastic spatula, scrape
the excess grease and meat
from the meat platen into
the Grease Box, and remove the
Grease Box and Insert. Dispose
of the grease properly, and wash
using soap and water. Sanitize
8
the insert.
8. Wipe clean and sanitize the Meat
Holding Platen.