![background image](http://html.mh-extra.com/html/nidec/unidrive-m600/unidrive-m600_user-manual_1687782072.webp)
72
SI-Ethernet User Guide
Issue: 3
This parameter reports the link’s status if it has been loaded. A
Easy Mode
Reset
(
S.10.002
) is
required to load any changes.
-22
Invalid DST IP
Destination IP address is invalid
-21
SYNC unsupported
Sync link does not support mappings to other option
parameters
-20
MEC offset
Incorrect MEC offset
-19
Invalid tx rate
Tx rate must be a factor of 1 second
-18
Too many mapping
The number of mapping items exceeds the range
supported
-17
Link busy
The link specified is busy
-16
Invalid profile
The profile is invalid
-15
Invalid mapping
The mapped parameter does not exist
-14
Read only param
The mapped parameter is read only
-13
Msg mismatch
Link number and direction do not match
-12
Msg too long
Resulting message is too long
-11
Attrib NA
Attribute not available
-10
Attrib RO
Attribute is read only
-9
Attrib missing
Attribute is missing
-8
Timeout
Timeout
-7
In error
The specified link is in error state
-6
Link num in use
The link number specified is already in use
-5
Not editable
The link specified is not editable
-4
Invalid link num
An invalid link number was specified
-3
Invalid args
Link number / argument zero or invalid
-2
Too many links
Maximum number of links has been reached
-1
Out of memory
Failed to allocate memory
0
OK
Configuration of link successful
1
Not running
Ok, not running
2
OK sync
Configuration of synchronous link successful
Value
Text
Description