SI-Ethernet User Guide
65
Issue: 3
Sa
fe
In
Me
ch
E
G
Par
amet
er
Key
an
PC T
Sec
Di
G
Ind
ex
This parameter specifies the type of transmission for the Tx3 link.
This parameter specifies the IP address of the destination device for the Tx3 link. If
Tx3 Link
Transmission Type
(
S.10.034
) is set to either broadcast or one of the multicast settings this
parameter will display the appropriate address.
S.10.034
Tx3 Transmission Type
Minimum
0
(Display: Unicast)
Maximum
11
(Display: Multicast10)
Default
0
(Display: Unicast)
Units
None
Type
8 Bit User Save
Update Rate
Read on reset
Display Format
None
Decimal Places
0
Coding
RW, Txt, BU
Value
Text
Description
0
Unicast
Link is unicast to the IP address specified
1
Broadcast
Link is broadcast (255.255.255.255)
2
Multicast1
Link is multicast to the IP address (239.255.0.1)
3
Multicast2
Link is multicast to the IP address (239.255.0.2)
4
Multicast3
Link is multicast to the IP address (239.255.0.3)
5
Multicast4
Link is multicast to the IP address (239.255.0.4)
6
Multicast5
Link is multicast to the IP address (239.255.0.5)
7
Multicast6
Link is multicast to the IP address (239.255.0.6)
8
Multicast7
Link is multicast to the IP address (239.255.0.7)
9
Multicast8
Link is multicast to the IP address (239.255.0.8)
10
Multicast9
Link is multicast to the IP address (239.255.0.9)
11
Multicast10
Link is multicast to the IP address (239.255.0.10)
S.10.035
Tx3 Destination Address
Minimum
0
(Display:0.0.0.0)
Maximum
4294967295
(Display: 255.255.255.255)
Default
0
(Display:0.0.0.0)
Units
None
Type
32 Bit User Save
Update Rate
Read on reset
Display Format
IP Address
Decimal Places
0
Coding
RW, BU
This parameter value is not locked and may be changed by the user, if this value is
changed to any of the multicast addresses (Multicast1, Multicast2 to Multicast10) or the
broadcast address then
Tx3 Link Transmission Type
(
S.10.034
) will indicate the
appropriate setting.
NOTE