![background image](http://html1.mh-extra.com/html/nidec/digistart-d4/digistart-d4_user-manual_1687788061.webp)
Programmable Parameters
10J –
User Parameter 3
Options:
See parameter 10H
User Parameter 1
for details.
Default:
Motor pf
Description:
Selects which information will be displayed on the programmable monitoring
screen. See parameter 10H
User Parameter 1
for details.
10K –
User Parameter 4
Options:
See parameter 10H
User Parameter 1
for details.
Default:
Motor Temperature (%)
Description:
Selects which information will be displayed on the programmable monitoring
screen. See parameter 10H
User Parameter 1
for details.
10L –
User Parameter 5
Options:
See parameter 10H
User Parameter 1
for details.
Default:
Hours Run
Description:
Selects which information will be displayed on the programmable monitoring
screen. See parameter 10H
User Parameter 1
for details.
10M –
User Parameter 6
Options:
See parameter 10H
User Parameter 1
for details.
Default:
Number of Starts
Description:
Selects which information will be displayed on the programmable monitoring
screen. See parameter 10H
User Parameter 1
for details.
9.13 12 Communications Card
12A –
Modbus Address
Range:
1 - 254
Default:
1
Description:
Sets the Modbus RTU network address for the soft starter.
12B –
Modbus Baud Rate
Options:
4800
9600 (default)
19200
38400
Description:
Selects the baud rate for Modbus RTU communications.
12C –
Modbus Parity
Options:
None (default)
Odd
Even
10-bit
Description:
Selects the parity for Modbus RTU communications.
12D –
Modbus Timeout
Options:
Off (default)
10 seconds
60 seconds
100 seconds
Description:
Selects the timeout for Modbus RTU communications.
59