4
– English
EN
4.4.1.3 - Delete with NON-memorised transmitter
01.
OFF
Shut off power to the TT1VR for 5 s
02.
ON
Power the TT1VR on, and within 10 s
on the NEW transmitter:
5 s
2
03.
OFF
Shut off power to the TT1VR for 5 s
04.
ON
Power the TT1VR on: you can access
the delete menu with the NON-mem-
orised transmitter (see Table 2)
4.4.2 - All the available programming modes to
install the TT1VR in a comprehensive and ex-
pert manner
This manual describes in detail only the basic procedures
for programming the TT1VR. To programme the control
unit in an advanced and comprehensive manner, refer
to
“TT1VR - Programming table”
, not included in this
manual but available for downloading on the website www.
niceforyou.com. The Table
lists all the programming modes
available for the TT1VR control unit. These are grouped
according to “levels” and each level includes the following
procedures.
Level 1
• Venetian position:
a intermediate comfort position for
the bottom limit position which is called up with trans-
mitter buttons
▲
/
▼
.
• Intermediate position 1:
an intermediate comfort
position for the top limit position which is called up with
transmitter buttons
▲
+
■
.
• Unload:
a brief downwards movement once the Vene-
tian position has been reached.
• Presetting:
to speed up the TT1VR programming pro-
cedure, you can choose one of the following settings:
> Shutter
- Tilting mode: disabled.
- With the Wind: the shutter moves downwards.
- Wind security: disabled.
- With the Rain: the shutter moves downwards.
- With Sunshine: the shutter moves to the “intermediate
position 1”. If this position is not programmed, the shut-
ter moves downwards.
- Without Sunshine: no movement.
> Venetian
(factory setting)
- Tilting mode: enabled.
- With the Wind: the blind moves upward.
- Wind security: disabled.
- With the Rain: the blind moves upward.
- With Sunshine: the blind moves to the “venetian posi-
tion”. If this position is not programmed, the blind moves
downwards.
- Without Sunshine: the blind moves to the hight limit
switch position.
> Awning
- Tilting mode: disabled.
- With the Wind: the awning moves upward.
- Wind security: enabled.
- With the Rain: the awning moves upward.
- With Sunshine: the awning moves downwards.
- Without Sunshine: the awning moves upward.
Level 2
• Intermediate positions 2, 3, etc.:
up to 30 for the bot-
tom limit position, based on the programming.
• Climate sensors:
response with and without sunshine,
and in case of rain and wind.
• Tilting:
custom programming for Venetian blinds.
Level 3
• Tilting:
activation and deactivation.
• Memory:
locking and unlocking.
Level 4
• Transmitter:
delete a single transmitter or all transmitters.
• Limit position:
delete.
Level 5
• Memory:
delete all (restores factory settings).
5
DISPOSAL OF THE PRODUCT
This product constitutes an integral part of the auto-
mation system, therefore it must be disposed of to-
gether with it.
As for installation, and even at the end of product lifetime,
all the disassembly and scrapping operations must be per-
formed by qualified personnel. This product is made up of
different types of material, some of which can be recycled
while others must be disposed of. Seek information on
the recycling and disposal systems envisaged by the local
regulations in your area for this product category.
CAUTION! - Some parts of the product may con-
tain polluting or hazardous substances which, if dis-
posed of into the environment, constitute serious
environmental and health risks.
As indicated by the symbol, the product may
not be disposed of as domestic waste. Sort
the materials for disposal, according to the
methods envisaged by current legislation in
your area, or return the product to the retailer
when purchasing an equivalent product.
WARNING! - Local legislation may include the ap-
plication of serious fines in the event of improper dis-
posal of this product.
Disposal of batteries
WARNING! - Discharged batteries contain pollut-
ant substances and therefore must never be disposed
of as normal waste. Dispose of them in observance
of waste “separation” and collection procedures as
required by local regulations.
