User Manual
Version 0.10
Indicator
Name
Description
Fire alarm
System in the alarm condition
Pre-alarm
System in pre-alarm, triggered by a detector or by
a zone configured in type A or B (see 5.3.3)
General fault
Signals a problem with the system
System fault
Signals a fault in the panel itself
System silenced
Indication that sounders have been silenced
Item disabled
At least one item in the system is disable, that can
be a supervised output, a loop device or a zone
Delay active
Fixed - There are delays configured
Blinking - Delays are running, if the user does not
act, an alarm will occur after the configured time
Test mode
There are items under test that will not trigger
alarms or faults
Power on
Fixed - The system is powered with the mains
Blinking - The system is powered with the battery
Table 4:
NURIA light indicators.
Button
Function
Silence buzzer - disables the internal buzzer
Delay override - activates sounders immediately when the system is with
the delay active
Table 5:
Function of the panel buttons.
4.3
Touchscreen
Figure 6 shows the look of the home screen when in access level 1.
The display can be divided in two main areas:
•
Header
- Permanently visible, contains information about the panel status;
•
Panel information
- Displays an overview of the panel status.
4.3.1
Header
The header can be divided in three separated areas, marked in figure 7 with orange rectangles:
1.
Navigation
- Buttons and indications there are touchable;
2.
Information
- Information about the panel;
3.
Access level
- Information and actions related to access level.
Details for the icons for
Navigation
and
Information
are available in table 6. To change the current
access level
of the panel, press the button on the top right corner: if in access level 1 press the
Login
button insert the pin (see section 5.1), if in level 2 or 3 just press
Logout
to return to level 1.
4.3.2
Panel information
Figure 8 shows the display with login in access level 3, with number identifying 8 different areas:
11
11 / 26