User Manual
Version 0.10
2.
Faults
- this rectangle will change every time a fault event appears. The total number of active faults
will be displayed that will only be clean after a reset. Press this rectangle to view fault details;
3.
Alarms
- same as faults but related to alarms;
4.
Info
- this area is used to display relevant information not directly related to alarms or faults. This
counter can be cleared without a reset.
5.
Zones
- information related to zones. NURIA supports up to 120 zones but a zone will only become
active, and integrate in this counter, if it has devices associated to it. When a zone is disabled or in
test this rectangle will be updated with the corresponding information;
6.
Devices
- same as zones but related to devices;
7.
Network panels
- displays the number of panels in the network including the current panel. It can be
pressed to show detailed information.
8.
Quick actions
- level 2 and 3 actions:
•
Reset
- clear all alarms, faults and all fire and sounder outputs;
•
Silence alarm
- silence the internal buzzer and all sounders;
•
Evacuate
- turn on all sounders.
5
Configuration
NURIA can be configured entirely using its touchscreen in a simply and intuitive manner, even the more
complex configurations can be defined from here. This section describe the most important configuration
for the panel to work accordingly to the needs of the surrounding environment.
5.1
Access levels
In order to change configurations in NURIA access level 2 or 3 is required. Use the
Login
button on the
right top of the screen to enable advanced access level operations.
5.1.1
Access level 2
The default code to enter access level 2 is
2222
. It is recommended to change this code which is
possible with access level 3.
Available options in access level 2:
• Silence alarms, evacuate and reset;
• Enable/Disable zones, devices and supervised outputs;
• Visualize log of events;
• Set date and time;
• Switch day/night configuration: day, night or scheduled;
• Manage interface settings: language, screen backlight and touch feedback.
5.1.2
Access level 3
The default code to enter access level 3 is
3333
. It is recommended to change this code which is
possible with this level.
Available options in access level 3:
• All the options of the access level 2;
• Full configuration of loops, zone and devices;
• Event configuration;
• Modify access level codes;
14
14 / 26
