©
National Instruments Corp.
5
FP-DO-400
Figure 3 shows the diagram of one channel’s discrete output
circuit.
Figure 3.
Discrete Output Circuit
Status Indicators
Figure 4 shows the module label and status indicators. You can
remove the insertable label to see wiring diagrams for the input
channels.
Figure 4.
Status Indicators and Module Label
After the module has been inserted into a terminal base (and power
is applied), the green POWER indicator turns on and the
FP-DO-400 informs the network module of its presence. When
the network module recognizes the FP-DO-400, it sends initial
configuration information to the FP-DO-400. After receiving this
initial information, the green READY indicator turns on and the
FP-DO-400 is in its normal operating mode. In addition to the
green POWER and READY indicators, each channel has a
numbered, green, output state indicator which lights when the
channel is in the ON state.
COM
V
out
V
sup
V
C
Optical
Isolation
Load