NI DAQ 6052E, User Manual

Page: 131 / 132

Index
NI 6052E User Manual I-8 ni.com
signal sources
floating signal sources, 4-10
ground-referenced signal sources, 4-10
single-ended connections
floating signal sources (RSE
configuration), 4-18
grounded signal sources (NRSE
configuration), 4-18
when to use, 4-17
SISOURCE signal, 4-33
software drivers, D-1
software installation, 2-1
software programming choices
National Instruments application
software, 1-4
NI-DAQ driver software, 1-4
specifications
analog input
amplifier characteristics, A-3
dynamic characteristics, A-4
input characteristics, A-1
NI 6052E accuracy information, A-2
stability, A-5
transfer characteristics, A-3
analog output
dynamic characteristics, A-7
NI PCI/PXI-6052E and NI
DAQPad-6052E accuracy
information, A-6
output characteristics, A-5
stability, A-8
transfer characteristics, A-6
voltage output, A-7
bus interface, A-10
digital I/O, A-8
physical, A-11
power requirement, A-11
timing I/O, A-9
triggers
analog trigger, A-9
digital trigger, A-10
RTSI trigger, A-10
STARTSCAN signal, 4-30
See also PFI7/STARTSCAN signal
support
technical, D-1
system integration services, D-1
T
technical support, D-1
telephone technical support, D-1
timing connections
DAQ timing connections
AIGATE signal, 4-33
CONVERT* signal, 4-32
EXTSTROBE* signal, 4-35
SCANCLK signal, 4-34
SISOURCE signal, 4-33
STARTSCAN signal, 4-30
TRIG1 signal, 4-27
TRIG2 signal, 4-28
typical posttriggered acquisition
(figure), 4-26
typical pretriggered acquisition
(figure), 4-27
general-purpose timing signal
connections
FREQ_OUT signal, 4-44
GPCTR0_GATE signal, 4-39
GPCTR0_OUT signal, 4-40
GPCTR0_SOURCE signal, 4-39
GPCTR0_UP_DOWN signal, 4-40
GPCTR1_GATE signal, 4-41
GPCTR1_OUT signal, 4-42
GPCTR1_SOURCE signal, 4-41
GPCTR1_UP_DOWN signal, 4-43
overview, 4-24
programmable function input
connections, 4-25
timing I/O connections (figure), 4-25