©
National Instruments Corporation
2-1
2
Installing and Configuring
the NI 6052E
This chapter explains how to install and configure the NI 6052E.
Installing the Software
Complete the following steps to install the software before installing the
NI 6052E.
1.
Install the ADE, such as LabVIEW, Measurement Studio, or
VI Logger, according to the instructions on the CD and the release
notes.
2.
Install NI-DAQ according to the instructions on the CD and the
DAQ Quick Start Guide
included with the device.
Note
It is important to install NI-DAQ before installing the NI 6052E to ensure that the
device is properly detected.
Installing the Hardware
You can install the NI PCI/PXI-6052E in any available PCI system or
5 V PXI slot, respectively, in the computer. However, to achieve best noise
performance, leave as much room as possible between the
NI PCI/PXI-6052E and other devices. You can connect the
DAQPad-6052E to any available 1394 port.
The following are general installation instructions. Consult the computer or
chassis user manual or technical reference manual for specific instructions
and warnings about installing new devices.
Note
Follow the guidelines in the computer documentation for installing plug-in
hardware.
