NI DAQ 6052E, User Manual

Page: 126 / 132

Index
© National Instruments Corporation I-3 NI 6052E User Manual
CONVERT* signal, 4-32
EXTSTROBE* signal, 4-35
SCANCLK signal, 4-34
SISOURCE signal, 4-33
STARTSCAN signal, 4-30
TRIG1 signal, 4-27
TRIG2 signal, 4-28
typical posttriggered acquisition
(figure), 4-26
typical pretriggered acquisition
(figure), 4-27
DAQPad-6052E. See NI 6052E devices
DAQ-STC, C-1
data acquisition timing connections.
See DAQ
timing connections
DGND signal
description (table), 4-4
I/O signal summary (table), 4-7
diagnostic resources, D-1
DIFF (differential) input mode
description, 4-13
when to use, 4-13
DIFF mode
description (table), 3-3
recommended configuration
(figure), 4-14
differential connections
ground-referenced signal sources, 4-16
nonreferenced or floating signal
sources, 4-14
digital I/O
common questions, C-7
overview, 3-10
signal connections, 4-22
specifications, A-8
digital trigger specifications, A-10
DIO<0..7> signal
description (table), 4-4
digital I/O signal connections, 4-22
external expansion connector, 4-6
I/O signal summary (table), 4-7
documentation
online library, D-1
drivers
instrument, D-1
software, D-1
E
EEPROM storage of calibration constants, 5-1
environmental noise, 4-44
equipment, optional, 1-6
example code, D-1
EXTREF signal
analog output reference selection, 3-6
analog output signal connections, 4-20
description (table), 4-4
I/O signal summary (table), 4-7
EXTSTROBE* signal
DAQ timing connections, 4-26
description (table), 4-4
I/O signal summary (table), 4-7
F
field wiring considerations, 4-44
floating signal sources
description, 4-10
differential connections, 4-14
single-ended connections (RSE
configuration), 4-17
FREQ_OUT signal
description (table), 4-5
general-purpose timing signal
connections, 4-44
I/O signal summary (table), 4-8
frequently asked questions, D-1
frequently asked questions.
See questions and
answers
fuse, self-resetting, 4-4, C-1