The 1000Mbps and Link/Act indicator will light at the
same time when sharing the SFP fiber port.
Reset button: Located at the lower left corner of the
front panel, this button is used to clear the current
8
LED Indicator
POWER
1000Mbps
LINK/ACT
SYS
Status
Description
Color
Orange
Light
Light
Blinking
Light
Blinking
It is “on” when the Switch is
turned on.
--
Orange
Orange
--
Orange
--
Orange
--
OFF
OFF
Light
OFF
If this indicator is off, check the
AC power connector to ensure
proper insertion of the power
cord and if the power switch is
turned on.
The port is connected to a
1000Mbps fast Ethernet
station.
The switch is transmitting or
receiving data.
There is no connection at the
corresponding port.
--
OFF
The switch is in the rebooting
mode.
Off – flashing for 1 s – off –corresponding port status
The switch works normally.
The switch is in the resetting
mode.
Status of the
port
indicators
during
power-on
self-test of
switch
The port is not connected to a
1000Mbps fast Ethernet station.
When a device is connected to a
port of the switch, the
LINK/ACT lights up. If only the
LINK/ACT indicator is on but all
of the other indicators are off, it
means that the connection rate
of this port is 10/100 Mbps.
