3.11.2 Snooping Status
IGMP Status:
Displays the multicast snooping function
options of the corresponding VLAN. When the multicast
table is not established, the “Querier” displays as “Idle”.
When the switch snoops into a multicast message, the
“Querier” displays as “Active”, and the value in “Queries
transmitted” or “Queries received” may change at the
same time. By changing the values in “V1 Reports”, “V2
Reports” and “V3 Reports”, it is possible to know the
corresponding version of the multicast messages
received. If a message is of V2 and a device in the
multicast table is required for leaving the multicast group,
the leave message is transmitted.
Refresh:
Use this button to manually refresh current port
status information.
39
•
