Chapter 3 Configuration
3.1 Fast Login
Since the NW223NXT56/NW223NXT57 is not
equipped with an internal DHCP server, you need to
manually configure the IP address of the computer for
login and configuration. The table below lists the default
parameters of the switch.
You can log in to the setting window of the switch through
the following steps:
a. Connect the switch with the computer NIC interface.
b. Power on the switch.
c. Check whether the IP address of the computer is
within the 192.168.0.xxx range (“xxx” is the integer
between 2~254), for example, 192.168.0.100. For the
IP address setting, refer to Appendix 2.
d. Open the browser, and enter http://192.168.0.1;
then press “Enter”. The switch login window appears, as
shown below.
e. Enter the user name and password (both, default user
name and default password are “admin”), and then click
“Apply” to log in to the switch configuration window.
14
Parameter
Default IP address
Default user’s name
Default password
Default Value
192.168.0.1
admin
admin
