Nexxt Solutions - ACRUX - Wireless N Gigabit Router
39
Disabled
- The Secondary Connection is
disabled by default, so there is only the PPPoE
connection available, this being the
recommended setting for this feature.
Dynamic IP
- You can check this radio button to
use Dynamic IP as the secondary connection to
gain access to the local area network provided
by ISP.
Static IP
- You can check this radio button to
use Static IP as the secondary connection to
gain access to the local area network provided
by ISP.
*
*
*
Connect on Demand
- In this mode, the Internet
connection can be terminated automatically after
a specified period of inactivity (
Max Idle Time
) and
be re-established when you attempt to access the
Internet again. If you want to keep your Internet
connection active all the time, please enter “0”
in the
Max Idle Time
field. Otherwise, enter the
number of minutes you want to have elapsed
before your Internet access disconnects.
Connect Automatically
- The connection can be
re-established automatically after being disabled.
Time-based Connection
- The connection will only
be established within the period ranging from the
start time to the end time (both are in HH:MM
format).
Note:
The Time-based Connection feature can work
only after the system time on the System Tools ->
Time page has been configured.
*
Connect Manually
- You can click the
Connect/
Disconnect
button to connect/disconnect
immediately. This mode also supports the Max
*
*
*
Summary of Contents for Acrux3000
Page 1: ......
